Steering assist is an important component of your car's steering system that helps you steer your car with ease. However, if you receive a "Steering Assist is Reduced Drive with Care" warning message on your dashboard, it means that your steering assist system is not working properly, and you need to reset it as soon as possible. In this article, we will guide you on how to reset steering assist when you encounter such a warning message.

Step 1: Stop Your Car

The first step is to stop your car in a safe place. Turn off the engine and make sure that the car is in park or neutral, depending on the transmission type. After that, wait for a few minutes to allow the car's system to cool down.

Step 2: Check the Power Steering Fluid Level

The next step is to check the power steering fluid level. Open the hood of your car and locate the power steering fluid reservoir. Check the fluid level and make sure it is between the minimum and maximum marks. If the fluid level is low, add the recommended power steering fluid until it reaches the maximum mark. After that, close the hood.

Step 3: Turn the Steering Wheel

Turn the steering wheel to the left and hold it for a few seconds, then turn it to the right and hold it for a few seconds. Repeat this process a few times to help bleed air from the power steering system. After that, return the steering wheel to the center position.

Step 4: Disconnect the Battery

If the warning message still appears, disconnect the negative cable of the battery for about 15 minutes, then reconnect it. This will reset the car's computer system and clear any error codes that may be causing the warning message to appear.

Step 5: Turn On the Ignition

Turn on the ignition without starting the engine. Wait for a few seconds for the car's system to initialize. After that, start the engine and check if the warning message is still displayed. If the message is gone, your steering assist system has been reset successfully.

Step 6: Take Your Car for a Test Drive

Take your car for a test drive to ensure that the steering assist system is working properly. Drive at a low speed and check if the steering wheel feels loose or tight. If everything feels normal, you have successfully reset your steering assist system.

Conclusion

Resetting your steering assist system is a simple process that can be done in a few minutes. By following the steps outlined above, you can reset your steering assist system and get rid of the "Steering Assist is Reduced Drive with Care" warning message on your dashboard. However, if the warning message persists after resetting the system, it is recommended that you take your car to a professional mechanic for further diagnosis and repair.